Close
Skip to content
Easy-Laser
Easy-Laser
Home ► Product ► Easy-Laser

News

Easy-Laser

Machineries Principals:
pumps, gearboxes, motors, belt/chain drives, mechanical construction, extruders, hydraulic pipes, diesel engines, propeller shaft installation, turbines, Compressor, rolling mills, machines table, press table, etc)

Geometric Measurement

E910 - Flange

E910 - Flange

Easy-Laser® E910 Flange is a system used to measure flange flatness of windmill towers, wings and hubs, tower bases, etc. It can also be used for parallelism measurement.

E915 - Flange spin

E915 - Flange spin

Easy-Laser® E915 is a system used to measure the flatness of windmill tower flanges and slewing bearings with a rotating laser that is very easy to use for you. 

E920 - Geometric

E920 - Geometric

Easy-Laser® E920 can be used to carry out all the most common geometric measurements; straightness, flatness, squareness, plumb and level. Measurement is quick and precise.

E930 - Extruder

E930 - Extruder

Easy-Laser® E930 is designed to measure straightness and pointing direction, primarily on extruder pipes. Another application can be e.g. hydraulic pipes. 

E950 - Bore alignment

E950 - Bore alignment

Easy-Laser® E950 makes it easy to check and align bearings and bearing journals. All parts included in the system are designed and made even for the workplace.

E960 - Turbine alignment

E960 - Turbine alignment

The Easy-Laser® E960 Turbine alignment system makes measuring and adjusting diaphragms and bearings easier thanks to the wireless detector unit

E970 - Parallelism

E970 - Parallelism

For parallelism measurement of rolls and other objects in numerous applications. The Easy-Laser® E970 is especially suitable when many objects are to be measured and aligned, and when the distances are long. 

E980 - Sawmill

E980 - Sawmill

The Easy-Laser® E980 Sawmill system will help you increase efficiency and save money in your sawmill. The system measures straightness, flatness and squareness. Equally useful on band saws and circular saws.

Shaft alignment tools 

XT770 - Shaft alignment and geo applications

XT770 - Shaft alignment and geo applications

With the Easy-Laser® XT770 you can perform axle alignment of both horizontally and vertically/flange mounted machines.

XT660 - Shaft alignment

XT660 - Shaft alignment

With the Easy-Laser® XT660 you can handle all the important steps in machine setup and maintenance. let’s get this product immediately and consult all your needs now

XT550 - Ex/ATEX Shaft alignment

XT550 - Ex/ATEX Shaft alignment

Easy-Laser® XT550 is an intrinsically safe shaft alignment system, developed for use in potentially hazardous areas. let’s get this product immediately and consult all your needs now

XT440 - Shaft alignment

XT440 - Shaft alignment

Easy-Laser® XT440 is our most basic, app based system. Lets you perform all necessary steps of shaft alignment on horizontal and vertically/flange mounted machines. 

Wind - Shaft alignment

Wind - Shaft alignment

Shaft alignment systems specially developed for alignment of wind turbines.

E710 - Shaft alignment

E710 - Shaft alignment

Easy-Laser® E710 handles all stages of machine setup and alignment.

You need more information? Contact us now

You can ask first about the products we offer by contacting us now via WhatsApp.